IA-JB-60T Operator Docs
Ask the IA Assistant
24/7. Answers from the engineering manual for this IA-JB-60T.
Max Rating
6,000 lb
At Full 12 ft
2,100 lb
OPERATION
01
Visual Inspection
Check for cracked welds or elongated holes. Verify Inner Boom End Plate torque is 90 FT-LBS with red threadlocker.
02
Mounting & Retention
Fully seat forks. Secure both Retaining Pins behind heels AND wrap the Safety Chain around the carriage, keeping the chain close to level (under 45 degrees).
03
Capacity Verification
At full reach (144") the boom's structural limit is 2,100 lb. That is the boom's strength, not your forklift's allowable load. Your machine is usually the lower limit, so use the Load Calculator to get the allowable load for your forklift.
04
Lifting Protocol
Vertical Lifting Only. Watch for Pinch Points. Keep a 10 ft fall zone, and turn off the carriage tilt and side-shift.
Engineering Data
Empty Weight465 lb
Overall Height11.5 in
Length (retract / extend)103 / 151 in
Width3 ft 3 1/2 in
Extension2-section, up to 12 ft
Lift Points9 hook positions
Load Center Range24-144 in
Fork Pockets (inside)7.63 in W x 3.63 in H, 44 in deep
Fork Spacing30 in center-to-center (fixed)
Design CategoryBTH-1 Cat B · Service Class 0
StandardsASME BTH-1-2023 & B30.20